Nevion Multicon MRP - Manual (Page 34)

Modular Routing Protocol - MRP Rev. L
nevion.com | 34
8.2 Alarm list
Lists all alarms in the controller.
::= 'alist' [
::= [ {}]
See the alarm status for more information about the response.
List all alarms with this severity or higher.
Example:
Command: Response:
alist 1 ? "alist 1"
alarm 429 3 1324755414 3 5 "STUDIO3-SL-HD-1616" "Power
B failed"
alarm 302183 2 1381402151 3 2 "ROOM4-RACK2, Frame 2,
Card 7, FRS-HD-CHO" "Sync source"
8.3 Alarm acknowledge
Change the state of alarms.
::= 'alarm'
::= |','|'-'
::= [{}]
Action to perform on the alarm.
0 Unacknowledge. This will change alarms in the
Acknowledged state to New. Unacknowledge of other
states will be ignored.
1 Acknowledge. This will change alarms in the Restored
state to Removed or New to Acknowledged.
Examples:
Command: Response:
alarm 429 0 %
alarm 429 1 1381484524 3 5 "STUDIO3-SL-HD-1616" "Power
B failed"
alarm 302183 1 %
alarm 302183 0 1381484691 3 2 "ROOM4-RACK2, Frame 2,
Card 7, FRS-HD-CHO" "Sync source"