Nevion Multicon MRP - Manual (Page 23)

Modular Routing Protocol - MRP Rev. L
nevion.com | 23
6.3 Request Crosspoint Status
– Entire Level – Compact
This command requests the crosspoint status of a specific level. This will give a response in
a compact format.
::= 'r' 'l'
::= [ {}]
::= 's' 'l' {}
Example:
Command: Response:
r l16 ? "r l16"
s l16 0 1 1 3 2 5 7 7
6.4 Request Virtual Crosspoint Status
— Entire Virtual Table
This command is used to request the crosspoint status of all destinations in a specified
virtual table. 'u' (unknown) is sent if the status cannot be determined, e.g. due to
disconnection of a router.
"Cross-level break-away" routing is indicated similarly to ordinary break-away routing, this
can greatly reduce the number of required sources if operational flexibility is needed with
respect to separation of inputs into separate virtual levels, depending on intended purpose.
::= 's' 'vt'
::= [ {}]
::= 'x'
::= 'vt'
::= |'u'|
::= ('vl' |'u'
)+
Example:
Command: Response:
s vt4 ? "s vt4"
x vt4 3 0 0 500
x vt4 u 1 0 500
x vt4 3 2 0 500
x vt4 vl1 4 0 500 vl2 2 0 500 3 0 500
x vt4 vl1 4 1 501 vl2 4 2 500 4 7 500
x vt4 2 5 0 500
x vt4 vl1 2 0 500 vl2 4 0 500 6 0 500
x vt4 6 7 0 500