NavCom NCT-2030M Rev.C - Manual (Page 39)

NCT-2030M User Guide - Rev. C
GPS Receiver Performance
• Pseudo-range Measurement Precision (RMS):
Raw C/A code :
20cm @ 42 dB-Hz
Raw carrier phase noise: L1: 0.95 mm @ 42 dB-Hz
L2: 0.85 mm @ 42 dB-Hz
• Enhanced SBAS (WAAS/EGNOS) Positioning Accuracy:
Horizontal:
± 0.5m RMS
Vertical: ± 0.7m RMS
• RTK Positioning <10kms (Software option):
Horizontal:
± 1 cm + 1ppm RMS
Vertical: ± 2 cm + 1ppm RMS
• Code Differential GPS Positioning <200kms:
Horizontal:
± 12 cm + 2ppm RMS
Vertical: ± 25 cm + 2ppm RMS
Velocity: 0.01 m/s RMS
• User programmable output rates:
Position Velocity Time: Up To 5Hz,(10Hz,Opt.)
Raw data: Up To 5Hz,(10Hz, 25Hz, 50Hz Opt.)
• Data Latency:
Position Velocity Time:
< 20 ms at all rates
Raw data: < 20 ms at all rates
• Time-to-first-fix:
Cold Start, Satellite Acquisition: < 60 Seconds (Typical)
Satellite Reacquisition:
< 1 Second
• Dynamics:
(Speed and Altitude restricted by USA export laws.)
Acceleration: up to 6g
Speed: < 515 m/s (1000 knots)
Altitude: < 18.3km (60,000ft)
A-37