Safety first – NavCom NCT-2030M Rev.C User Manual
Page 36

NCT-2030M User Guide - Rev. C
Safety First
The owner of this equipment must ensure that all users
are properly trained prior to using the equipment and
are aware of the potential hazards and how to avoid
them.
Other manufacturer’s equipment must be used in
accordance with the safety instructions issued by that
manufacturer. This includes other manufacturer’s
equipment that may be attached to NavCom
Technology, Inc. manufactured equipment.
The equipment should always be used in accordance
with local regulatory practices for safety and health at
work.
There are no user serviceable parts inside the NCT-
2030M
GPS
sensor. Accessing the inside of the
equipment will void the equipment warranty.
Care should be taken to ensure that the NCT-2030M
does not come into contact with electrical power
installations, the unit is securely fastened and there is
protection against electromagnetic discharge in
accordance with local regulations.
The
GPS
sensor has been tested in accordance with FCC
regulations for electromagnetic interference. This does
not guarantee non-interference with other equipment.
Additionally, the
GPS
sensor may be adversely affected
by nearby sources of electromagnetic radiation.
The
Global Positioning System
is under the control of
the United States Air Force. Operation of the
GPS
satellites may be changed at any time and without
warning.
5-34