NavCom NCT-2030M Rev.C - Manual (Page 37)

NCT-2030M User Guide - Rev. C
A GPS Sensor Technical Specifications
The technical specifications of this unit are detailed
below. NavCom Technology, Inc. is constantly
improving, and updating our technology. For the latest
technical specifications for all products go to:
support.navcomtech.com
NCT-2030M
The NCT-2030M GPS sensor is fitted with an internal
Lithium coin cell used to maintain GPS time when
power is removed from the unit. This allows faster
satellite acquisition upon unit power up. The cell has
been designed to meet over 10 years of service life
before requiring replacement at a NavCom approved
maintenance facility.
Features
• Fully upgradeable receiver in robust housing
• "All-in-view" tracking with 26 channels
(12 L1 GPS + 12 L2 GPS + 2 SBAS)
• L1 & L2 full wavelength carrier phase tracking
• C/A, P1 & P2 code tracking
• User configurable as base or rover
• User programmable output data and navigation rates
• 64MB internal memory for data recording
• Output format NMEA 0183 or NavCom binary
• Superior interference suppression
• Patented multipath rejection
• LED Display for GPS
• CAN bus hardware compatible
• 1PPS Output (12.5ns relative timing precision)
• Event Marker Input
A-35