NavCom NCT-2030M Rev.C User Manual
Page 10
NCT-2030M User Guide - Rev. C
device is required since the receiver has 64MB of on-
board storage memory.
The NCT-2030M is equipped with additional features
allowing interconnectivity with a wide variety of
antennas, vehicle data busses and other
instrumentation to match specific applications and
configurations. The NCT-2030M also has a 1
PPS
output
port and a combined
Event/CAN Bus
interface port.
The optional RTK DGPS horizontal accuracy of 1 cm or
better and the vertical accuracy of 2 cm or better are
maintained as each output is independently calculated
based on an actual
GPS
position measurement, as
opposed to an extrapolation between 1Hz
measurements.
Integrated
GPS
and Inmarsat Antenna
The all-in-one housing incorporates our compact
GPS
antenna with excellent tracking performance and a
stable phase center for GPS L1 and L2. The robust
housing assembly features a standard 5/8”
BSW
thread
for mounting directly to a surveyor’s pole, tripod, or
mast and is certified to 70,000 feet.
Although rated to 70K feet, this antenna is not
designed for aircraft installations. E-Mail
for aircraft solutions.
Controller
The NCT-2030M
GPS
sensor is designed for use with an
external Controller Solution connected via one of the
two serial ports.
This may be accomplished using an IBM compatible PC,
Tablet PC or
Personal Digital Assistant
(
PDA
) and a
software program which implements the binary driver
1 - 8