NavCom RT-3020 Rev.A - Manual (Page 9)

RT-3020 User Guide
1-7
terrain. The sensor can be carried in a backpack with
the antenna either pole-mounted from the backpack or
on a survey pole with a single cable connection.
The RT-3020M is a real- ime kinematic ( RTK ) sensor
specifically designed for machine control applications in
construction, agriculture, mining and many other fields.
t
The RT-3020M is equipped with additional features
allowing interconnectivity with a wide variety of
antennas, vehicle data buses and other instrumentation
to suit specific applications and configurations. The RT-
3020M also has a 1
PPS output port and a combined
Event/ CAN Bus interface port.
GPS Antenna
Our compact GPS antenna with excellent tracking
performance and a stable phase center for GPS L1 and
L2 . The robust housing assembly features a standard
5/8” BSW thread for mounting directly to a surveyor’s
pole, tripod, or mast and is certified to 70,000’ feet.
Although rated to 70K feet, this antenna is not
designed for aircraft installations. Contact
[email protected] for aircraft solutions.
Controller
The RT-3020 GPS sensor is designed for use with an
external c ontroller solution connected via one of the
two COM ports.
This may be accomplished using an IBM compatible PC,
Tablet PC or
Personal Digital Assistant ( PDA ) and a
software program which implements the rich control
language defined for NavCom
GPS products. See the
User’s Guide of your Controller Solution for further
information.