NavCom RT-3020 Rev.A - Manual (Page 23)

RT-3020S User Guide
Chapter 3 Installation
This chapter provides guidance on how the hardware
should be installed for optimum performance.
Tri-Mode Antenna
The antenna is fitted with a 5/8” BSW threaded mount
with a depth of 16mm (0.63”). This should be used as
the primary means of mounting the antenna.
It is possible to remove the 5/8” BSW threaded alloy
insert to reveal the secondary means of mounting the
antenna which consists of a 1-14UNS-2B thread with a
depth of 16mm (0.63”) typically used in the marine
industry for navigation antenna.
Figure 6: Tri-Mode GPS Antenna
The eight Philips screws on the base of the antenna
should not be loosened or used for mounting the
antenna. This will compromise the environmental seal
of the antenna, may lead to internal damage and will
void the equipment warranty.
3-21