MovinCool Office Pro W20 - Manual (Page 23)

23
OPERATION (cont.)
How to Set a Program
SET START TIME
1. Press and hold the SET
PROG button for 3
seconds or until beep.
2. Press SET TEMP buttons
to scroll day of the week.
3. Press ENTER button.
4. Press SET TEMP buttons
to select desired hour.
5. Press ENTER button.
6. Press SET TEMP buttons
to select desired minute.
7. Press ENTER button.
SET STOP TIME
8. Press SET TEMP buttons to scroll day of the week.
9. Press ENTER button.
10. Press SET TEMP buttons to select desired hour.
11. Press ENTER button.
12. Press SET TEMP buttons to select desired minute.
13. Press ENTER button.
SET FAN SPEED
14. Press SET TEMP buttons to select desired fan speed.
15. Press ENTER button.
SET SET-POINT TEMPERATURE
16. Press SET TEMP buttons to select desired temperature.
17. Press ENTER button.
EXIT PROGRAM EDITING MODE
18. Press SET PROG button to exit program editing mode.
EDIT MULTIPLE PROGRAMS
19. Repeat step 1. to 18. to set up multiple programs.
Note: Maximum 7 programming sequences
Step 1 & 18
Step 2 to 17
ILL00055-00