MovinCool Office Pro W20 - Manual (Page 11)

11
INSTALLATION (cont.)
Water Pipe or Hose Connection (cont.)
Connecting Water Pipes (cont.)
4. Make sure that water pipes are connected properly to the unit, and there is no
water leakage.
CAUTION: Supply water pressure limitation of the unit is maximum
150 psi (1,034 kPa). Do not use the unit with water which contains a
high corrosive factor.
Note:
1. Service shut-off valves and drain plugs are recommended to be installed at the
water supply and return lines for routine field service, emergency service, or
removal of the unit in off-season. The drain plugs are used to drain the
remaining water in the system. The shut-off valves and drain plugs should have
a minimum pressure rating of 150 psi (1,034 kPa). The drain plugs should be
connected between the shut-off valves and the unit.
2. When supply water quality is poor, filters that can be easily serviced should be
placed in the water supply line.
Connecting Optional Water Hoses
1. Remove the caps from the female NPT connections on the right side panel of
the unit.
Note: Small residues of water may drip when the caps are first removed.
2. Apply teflon tape to the male threads on the two supplied garden hose
adapters.
3. Connect the supplied garden hose adapters to the female NPT connections
on the unit.
ILL00167-00