MovinCool Classic Plus 14 - Manual (Page 6)

6
GENERAL WARNINGS & CAUTIONS
1. All electrical work, if necessary, should only be performed by qualified
electrical personnel. Repair to electrical components by non-certified
technicians may result in personal injury and/or damage to the unit. All
electrical components replaced must be genuine MovinCool parts, purchased
from an authorized reseller.
2. The proper electrical outlet for MovinCool units must be equipped with a UL
approved circuit breaker.
3. Because of potential safety hazards under a certain condition, we strongly
recommend against the use of an extension cord.
However, if you still elect to use an extension cord, it is absolutely necessary
that it is a UL listed, 3-wire grounding type appliance extension cord, having a
3-blade grounding plug and a 3-slot receptacle that plugs into the appliance.
The marked rating of the extension cord should be 115 V, 15 A for Classic Plus
14, and 230 V, 20 A for Classic Plus 26 or equivalent.
4. The Classic Plus 14 is equipped with a 10 ft (3.0 m) UL approved LCDI power
cords. The Classic Plus 26 is equipped with a 6 ft (1.8 m) UL approved LCDI
power cord. For replacement, fixed location (hardwire) or power cord
lengthening (extension cord) cords are required, contact your MovinCool
reseller or a qualified electrician for approved replacement methods.
5. Never fold or place heavy objects on the power cord.
This could result in damage to the power cord causing electrical shock or fire.
6. Do not place water or any other liquid on the unit. This can cause damage to
the unit and increase the risk of electrical shock.
7. Do not sit or stand on the unit.