MovinCool Classic Plus 14 - Manual (Page 15)

15
FEATURES
1. A digital electronic control panel, which allows the user to easily control the
unit's operation.
2. Dual fan speeds (either HIGH or LOW) in both COOL and FAN ONLY modes.
3. Digital LCD display with blue backlight that indicates:
a. Clock with day and time
b. Room temperature and set point temperature
(either Fahrenheit or Celsius)
c. Fan speed status
d. Cool mode status
e. Program start time and stop time
f. Program run and stop
g. Status codes
h. Key locked option
4. The set point temperature can be adjusted between 70 °F (21 °C) and 95 °F
(35 °C) by the SET TEMP buttons ( / ).
5. Fire alarm control panel connection with automatic shut off.
6. Automatic shut off, warning signal output and alarm for temperature sensor
failure or loss of cooling.
7. A condensate drain “TANK FULL” indicator (LED) and display (LCD).
8. An automatic restart feature when the power is lost and regained. The unit
returns to the operating mode it was in prior to the loss of power. Any preset
program is retained in the memory in the event power loss occurs.
9. A programmable clock/timer function. This function allows the user to program
a specific time and day at which the unit begins to operate/start and turn off
(Automatic Operation).