Installation, Wiring for the optional fan kit, Figure 8 – Montigo RFK3002R User Manual
Page 3: Figure 9. wiring schematic for optional fans
Installation
Page 3
XT0019 - 150324
1.5V AA type
1.5V AA type
1.5V AA type
1.5V AA type
BLACK
WHITE
GREEN
To PPO
SPARK
SENSOR
RED
BLACK
BATTERY
PACK
TO ON/OFF
WALL SWITCH
YELLOW/GREEN
ORANGE
GREEN
6
10
4
6
3
4
OPTIONAL CPI/IPI SWITCH
BLUE
WHITE
X1
X5
X4
X3
X2
LED Lights
LED1 - Red LED
LED2 Amber LED
3.15A FUSE
SW1
BLUE
RED
OPTIONAL
X10
X11
X12
X13
BLACK
WHITE
Wht
Wht
Blk
Blk
Fan Connection
Figure 8
Wiring Schematic for Optional Fans with Proflame 2 System.
Wiring for the
optional Fan Kit
All
B-Series DV-2 fireplaces may be equipped with optional fan kits
for circulating heat into the living space.
Installations in Canada which employ the fans must be electrically
grounded in accordance with
CSA C22.1 Canadian Electrical Code
Part 1 and/or Local Codes.
Installations in the USA which employ the fans must be grounded
in accordance with local codes or, in the absence of local codes, with
the National Electrical Code,
ANSI/NFPA 70-1987.
NOTE: If any of the original wire supplied with the appliance is replaced, it
must be replaced with the same type, or its equivalent.
115/1/60 Supply
G
L1 L2
G
L2-WH
L1-BLK
Quick Connect
plug to motor
Figure 9. Wiring schematic for optional fans.