Monster HTUPS 3700 - Manual (Page 48)

40
RS-232 COMMUnICaTIOnS PROTOCOl anD COMManD SeT
COn’T
Computer : ST
UPS : (110 121 02 .0 0242 48 .0 00110011
Means : Input voltage is 110V .
Output voltage is 121V .
Output current is 2 .0A
Output watts is 242W .
Battery voltage is 48 .0 V
The Master/Slave switch is enabled and the bank-0/3/4 are turned on, the bank-1/2/5 are off .
5. Reboot command :
Computer : R
a . When Master/Slave switch is Enable .
UPS : The Master/Slave outlet will not be affected by the R command .
b . When Master/Slave switch is Disable .