Monster HTUPS 3700 - Manual (Page 23)

battery
Connector
15
Replace battery
Step One:
Remove the screws on the front panel and the front panel itself .
Step Two:
Remove the screw on the battery retaining bracket and bracket itself .
Step Three:
Disconnect the battery connector from the internal wire
of the HTUPS .
Step four:
Grasp the battery pull tab and pull the battery module
out of the HTUPS .
Step five:
Slide the new battery module into the HTUPS .
Step Six:
Re-install the battery retaining bracket and screws .
Step Seven:
Reconnect the battery connector to the internal wire of the HTUPS .
Step eight:
Re-install the front panel and screws .
IMPORTanT: It is illegal in most states to dispose of batteries in household trash . Contact your local recycler . Before
storing the HTUPS for an extended period of time, follow these maintenance recommendations to ensure proper
operation after long-term storage .