10-2. tag-based group – Microsens MS453522M User Manual
Page 84
MICROSENS 8 Port Gigabit Ethernet Switch
User’s Manual
79
3-10-2. Tag-based Group
Function name:
Tag-based Group Configuration
Function description:
It shows the information of existed Tag-based VLAN Groups, You can also easily create, edit
and delete a Tag-based VLAN group by pressing
buttons. User can add a new VLAN group by inputting a new VLAN name and VLAN ID.
Parameter description:
VLAN Name:
The name defined by administrator is associated with a VLAN group. Valid letters are
A-Z, a-z, 0-9, “
-
“ and “_” characters. The maximal length is 15 characters.
VID:
VLAN identifier. Each tag-based VLAN group has a unique VID. It appears only in tag-
based and Double-tag mode.
SYM-VLAN:
While the SYM-VLAN function of the group is enabled, all packets with this group VID
will be dropped in case they are transmitted from the ports that do not belong to this
group.
Member:
This is used to enable or disable if a port is a member of the new added VLAN,
“Enable” means it is a member of the VLAN. Just tick the check box (
)
beside the
port x to enable it.
Fig. 3-30