Microsens MS453522M - Manual (Page 204)

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual
199
qos
set advance-layer4
Syntax:
set advance-layer4 <#>
Description:
To set class of ports on advanced mode of Layer 4 qos.
Argument:
: port range, syntax 1,5-7, available from 1 to 8
<#>: special UDP/TCP port selection, range: 1-10
: 0-65535.
: default class (all other TCP/UDP ports). 1: high, 0: low
: special TCP/UDP class. 1: high, 0: low
Possible value:
: 1 to 8
<#>: 1-10
: 0-65535
: 1 or 0
: 1 or 0
Example:
MICROSENS(qos)# set advance-layer4 5 2 80 1 0
set default
Syntax:
set default
Description:
To set priority class of the packets that qos won’t affect.
Argument:
: class of service setting. 1: high, 0: low
Possible value:
: 1 or 0
Example:
MICROSENS(qos)# set default 1