Microsens MS453522M - Manual (Page 193)

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual
188
management
add
Syntax:
Usage: set [ ] [ ] [ ] [ ]
[ ]
Synopsis: set name Mary vid 20 ip 192.168.1.1-192.168.1.90 port 2-5,8
type h,s action a
Synopsis: set name Mary vid 20 ip 192.168.1.1-192.168.1.90
Description:
To save the adding management policy records.
When you don’t know how to set the management policy records, you can use this command as
follows:
MICROSENS (management-add)# set
This command will show exhaustive operating explanation for setting the management policy
records.
Argument:
[ ] ACL entry name.
[ ] VLAN ID.
[ ] IP range.
[ ] Incoming port.
[ ] Access type.
a(ccept) or d(eny).
Possible value:
[ ] No default and it must be set.
[ ] The range is 1-4095 and can be set to any.
[ ] For example, 192.168.1.90-192.168.1.90 or any.
[ ] For example, 1 or 1-8 or 1,3-5 or any
[ ] For example, h(ttp),s(nmp),t(elnet) or any.
No default and it must be set.
Example:
MICROSENS(management-add)# set name Mary vid 20 ip 192.168.1.1-192.168.1.90 port 2-5,8
type h,s action a
MICROSENS(management-add)# show
#: 1
Name : Mary
VlanID : 20 IP : 192.168.1.1-192.168.1.90
Type : Http,SNMP Action : Accept Port : 2,3,4,5,8