Care and maintenance, Steering control adjustments – Dixon 1950-2300 Series User Manual
Page 46
46
CARE AND MAINTENANCE
STEERING CONTROL ADJUSTMENTS:
To adjust neutral:
1. Lift seat.
2. Block up the unit so that the drive wheels are off the
ground.
3. Loosen ball joint jam nuts on control rod.
Note: The front jam nuts are left hand threads.
4. With steering control arms in the “out” neutral position,
start the engine and run at fast idle.
5. Adjust the neutral position by turning the control rod until
the wheels do not rotate.
6. Re-tighten the jam nuts on the control rod and check to
see that the drive wheels are not turning.
7. Repeat steps 3-6 for the other side.
8. Shut off engine before removing the blocks.
See also other documents in the category Dixon Gardening equipment:
- 7000 (40 pages)
- Grizzly ZTR KOH/968999627 (88 pages)
- Speedztr 36 (52 pages)
- 44 (52 pages)
- 36/968999609 (80 pages)
- KODIAK ELS 60 (52 pages)
- SPEEDZTR 42 (52 pages)
- 503 (33 pages)
- 966503601 (60 pages)
- Zeeter 14295-0804 (52 pages)
- SpeedZTR 965882401 (75 pages)
- SpeedZTR 16134-0803 (48 pages)
- RAM MAG 50 / 968999561 (88 pages)
- Kodiak 965871801 (72 pages)
- ZTR Mowers (11 pages)
- ZTR 5423 (70 pages)
- 27 KOH/968999588 (88 pages)
- 17823-0704 (56 pages)
- 700 Series (21 pages)
- 8000G Series (44 pages)
- ZTR 8025 (44 pages)
- ZTR 5502 (72 pages)
- Ram Ultra 966985401 (64 pages)
- 966495401 (72 pages)
- SpeedZTR 46BF (64 pages)
- SpeedZTR 539 131301 (15 pages)
- Kohler 968999725 (72 pages)
- Zeeter 16246-0803 (48 pages)
- Generic (11 pages)
- 3000 Series (38 pages)
- ZTR423 (16 pages)
- TECHNICAL DATA BROCHURE ZTR 361 (8 pages)
- 539130212 (27 pages)
- 1001 (41 pages)
- 72 - 27 KOH (52 pages)
- ZTR 6025 (40 pages)
- 5421 (43 pages)
- SPDZTR 30 BF (60 pages)
- 13089-0601 (60 pages)
- 4500 Series (48 pages)
- SilverTip ZTR 60 (56 pages)
- 502 (36 pages)
- 2000 (40 pages)
- GRIZZLY 60 KOH/968999590 (52 pages)
- D22H46 (30 pages)