Dixon 1950-2300 Series - Manual (Page 26)

26
OPERATION INSTRUCTIONS
CAUTION
Do not operate the engine in an enclosed area
due to the harmful exhaust gas produced.
STARTING INSTRUCTIONS
(cold engine):
1. Position choke control in “on”
position.
2. Position throttle control at 1/2
speed setting.
3. Insert ignition key and turn to “start”
position. When engine starts,
release ignition key. Key will return
to “run” position.
4. Once engine starts to warm up,
slowly move choke control to “off”
position.
5. Move throttle control to the “fast”
position.
6. Engine must be operated with
throttle control in the “fast” position,
or maximum setting to insure
adequate lubrication and cooling of
the engine, and cut quality of the
mower deck.