Dixon 1950-2300 Series - Manual (Page 19)

19
CONTROLS
MOWER DECK CUT HEIGHT LIFT LEVER:
•Located to the right and front of operator.
•Controls the cutting height.
•Eight positions of adjustment.
•Depress trigger and move lever forward to
lower deck.
•Depress trigger and pull lever back to raise
deck.
NOTE: Always use high position for transport.
BLADE DRIVE:
•Located on control panel to operator’s
right.
To engage blade: Pull up on switch.
To disengage blade: Push down.
CIRCUIT BREAKER
:
•Located on control panel to operator’s
right.
•Protection of the electrical system is by
(1) 15 amp circuit breaker.
•If circuit breaker trips, push button to
reset.
•If this condition repeats, consult dealer for
inspection and repair.