Dixon 1950-2300 Series - Manual (Page 22)

22
OPERATION INSTRUCTIONS
TO FREE WHEEL MACHINE
(UNLOCK TRANSMISSION):
Always turn off engine before engaging or disengaging the
hydro release (free wheel) valves. Never attempt to move
the valves with the engine running.
The hydro release valves are located beneath the seat, on
the front side of the hydro pumps. To access the release
valves, lift the seat frame assembly, use a 5/8” wrench to
rotate bolt counter-clockwise two full turns to disengage
pump. Repeat procedure for opposite pump. To engage,
rotate each pump bolt clockwise until bolt is snug.
Note: Before pushing or towing tractor, the trans-
mission must be unlocked, and parking brake
released. The tractor should never be pulled at
more than two miles per hour or for any
appreciable distance.