Dixon 1950-2300 Series - Manual (Page 30)

30
OPERATION INSTRUCTIONS
MOWING WITH A GRASS CATCHER ATTACHMENT:
In order to achieve optimum performance when mowing with a grass
catching attachment, please read and follow the tips listed below.
1. Set engine speed control to the wide open or full
setting. Allow engine, mower deck and blower to
reach full RPM before attempting to mow.
2. Do Not Attempt To Cut Grass When It Is Wet. Wet
grass will clog both the underside of the deck and
the attachment chutes. Empty bags often to prevent
plugging.
3. If the grass is tall, place the mower deck cut height
selector in the top or second notch. “Initially” overlap
cutting swaths instead of a full swath with each
pass.
4. Keep The Underside Of The Mower Deck Clean.
Frequent removal of dried grass and dirt will greatly
assist in bagging of the clippings.
5. Use only the correct blade(s). Some grass catching
attachments require a “high-lift” blade. See your
dealer for advice on the type of blade(s) needed for
your mower.
6. Maintain Sharp Blade(s) Throughout The Cutting
Season.