Table 2, 10/100 mbps port status leds (1~8), Table 3 – Microsens MS453490M Installation User Manual
Page 25: 1000 mbps port status leds (9~10), Table 4, System status leds
C
HAPTER
1
| Introduction
Description of Hardware
– 25 –
Table 2: 10/100 Mbps Port Status LEDs (1~8)
LED
Condition
Status
(Link/Activity)
On/Flashing Green
Port has established a valid 10/100 Mbps network
connection. Flashing indicates activity.
Off
There is no valid link on the port.
Table 3: 1000 Mbps Port Status LEDs (9~10)
LED
Condition
Status
(Link/Activity)
On/Flashing Green
Port has established a valid 1000 Mbps network
connection. Flashing indicates activity.
On/Flashing Amber
Port has established a valid 10/100 Mbps network
connection. Flashing indicates activity.
Off
There is no valid link on the port.
Table 4: System Status LEDs
LED
Condition
Status
Power
On Green
The unit’s internal power supply is operating
normally.
On Amber
The unit has an internal power supply fault.
Off
The unit has no power connected.
Diag
On Green
The system diagnostic test has completed
successfully.
Flashing Green
The system diagnostic test is in progress.
On Amber
The system diagnostic test has detected a fault.