MicroLinks PRO10 - user manual - Manual (Page 60)

PRO10 Application Program http://www.ViTiny.com
60
Copyright © 2008-2011 MicroLinks Technology Corp.
Fig 5-70 3 Points Angle
(2) 3 Points Chamfer: Measure charm and use . Draw first line on the angle (see
line A) and press the left mouse button to drag a line on the other side of the angle
(See line B) to calculate the chamfer. See Fig 5-71.. There is a small dot inside the
chamfer and shows 45.8
o
.
Fig 5-71 3 Points Chamfer
(7) 4 Points Angle: Use to measure an angle but only see 2 unparallel lines
shown on the object. See Fig 5-72, to draw a 1
st
line from the object (see line
A), and to draw the other unparallel line (see line B), the angle can be
automatically calculated. See Fig 5-72. There is a small dot show 45.3
o
.