MicroLinks PRO10 - user manual User Manual

Page 54

PRO10 Application Program http://www.ViTiny.com

圖 5-57 Setting of picture magnification

ratio display

圖 5-58 Saved ratio

 To delete and rename scale file
 Choose delete or rename the file from the drop down menu, see Fig.5-59.

Then click “delete” or “rename”.

Fig.5-59 drop down menu choose file

 Semi-Auto Calibration

Set up a customized semi-auto Calibration. See Fig. 5-60. “Input

Measurement Length” means the real length. For example, enter 400 means

4.00mm, enter 50 means 0.5mm. The Display Scale check-box is to decide to show

the Display Scale or not. If click the Horizontal Fixed, only a horizontal axis can

draw on the image; on the contrary, if click the Vertical fixed, only a vertical axis

can draw on the image. If choose “None”, axis can draw from any direction. A
horizontal or vertical axis can be draw by pressing „shift‟ button on your keyboard

together with clicking mouse left. After it is completed, please click “Finished” for

saving the new scale.