Input devices setting, Video format – MicroLinks PRO10 - user manual User Manual

Page 11

PRO10 Application Program http://www.ViTiny.com

2.2.1Input Devices Setting

Optional Input Devices, see Fig. 2-7, when there are 2 or more Input Devices

connecting to PC at the same time, you can choose which device you wish to use

圖 2-7 Optional Input Devices

2.2.2Video Format

Video Format is mainly to set up the frame rate, color space and output size etc. Fig 2-8a is

the Video Format of built in UVC Driver contents. Frame rate is frame numbers per second (fps) for

playing. Adjust the output size will slower or faster the fps, for example, if the fps is higher, the

preview video will be less clearly but with smooth performance. On the contrary, if the fps is lower,

the image will be more clear but with a little lagging performance. Output the image size means the

video quality, the default output size is 640*480; the user may change to preference output size such

as 320*240, 640*480…etc. The size changed higher, the resolution will be higher, and the data

quantity per second is bigger. The snapshot image size is according to output image size.

Fig.2-8b Video Format content after installed MICROSCOPE driver