MicroLinks PRO10 - user manual User Manual

Page 48

PRO10 Application Program http://www.ViTiny.com

Fig.5-41 Horizontal scale range is 5.60mm

Fig.5-42 Vertical scale range is 4.20mm

EX5: Calibrate the scale for Contacted in high mag.

Use the “calibrator” as a measurement base, flatly put the machine on the

observing object, adjust the focus to find the clearest image. See Fig.5-43

and Fig.5-44 the result from measurement. Horizontal and vertical scale

range is 1.40mm and 1.05mm. Using a calibrator is more easily and

accurately to get scale range.

Fig.5-43 Horizontal scale range is 1.40mm

Fig.5-44 Vrtical scale range is 1.05mm

(4) Factors cause the inaccurate on the measurement

There are few factors could cause the inaccurate on the measured figures.

 The used ruler is not exactly accurate, for example, a metal ruler is not

accurate than a calibrator.

 Because of the discrepancy, it is unable to know the accurate horizontal and

vertical scale range, too.