MicroLinks PRO10 - user manual User Manual

Page 52

PRO10 Application Program http://www.ViTiny.com

the horizontal or vertical scale. i.e., while only measure and enter the horizontal

scale range, it can calculate the vertical scale range automatically.

Fig.5-51 Fixed ratio adjustment

 Set ruler position & show (0,0) position

Ruler can display at Horizontal or Vertical position as per example per below

Fig.5-52 options. The image results in Fig.5-53.

Fig.5-52 Ruler vertical and horizontal

position setting

Fig.5-53 Ruler vertical and horizontal

Display

 To set up the horizontal effective range

As shown in Fig. 5-54, there‟re two options for horizontal effective range setup.

The default setting is auto-detection which is able to define the effective display.

If the detected value is “0”, or adjustment required, the manual adjustment

function is also available. There are different unit options, cm and inch, available

in manual adjustment mode.