Choose the color of aiming point, Clear the frame of aiming point, Video control mode and rotation mode – MicroLinks PRO10 - user manual User Manual
Page 39: No rotation
PRO10 Application Program http://www.ViTiny.com
39
Copyright © 2008-2011 MicroLinks Technology Corp.
Fig.5-20 Draw Circular
5.2.5Choose the color of aiming point “
”
Click this button, will pop up choose color dialog box and from there to choose color.
5.2.6Clear the frame of aiming point “
”
To clear all aiming lines on fame
5.3 Video control mode and rotation mode
This toolbar has the functions to flip video image. When holding the microscope to look at
self or observation, the video image, it will flip and move direction to be opposite. By the mode,
it can preview the correct direction. The brightness, contrast and exposure tool can be adjusted
and also can cause the video image to be clearer in different scene. Fig.5-21 is the selection
video control mode. Fig. 5-22 is the toolbar of video control mode.
Fig.5-21 video control mode
Fig. 5-22 video control mode toolbar
5.3.1No rotation “
”
Right hand holds the microscope to look at observation or observes other people. The