Metz Power Pack P76 - Manual (Page 37)

37
ķ
8. Hints for the User
The flashgun can become overheated during a fast
series of flash shots, i.e. when the next flash is trig-
gered right after the flash ready lamp lights up.
The Power Pack will then lengthen the recycling time
by two settings to enable the flashgun to cool down.
The display shown in fig.9 only appears when the
Power Pack is fully charged. The prevailing battery
condition will be displayed, e.g. 60%, if the Power
Pack is not fully charged.
Mains connecting plug for charger
The charger has an exchangeable adapter for
mains sockets. To replace the mounted adapter sim-
ply pull it out of the mains unit.
To remove the adapter follow the procedure shown
in the picture so as to minimise the levering action.
9. Technical Data
Rated voltage: 9.6 V
Rated capacity: 3 Ah
Rated charging time: ca. 140 min.
Refresh time:
max. 32 hours
Number of flashes (full-power flashes) without SCA
adapter:
45 CL/CT . . . . . . . ca. 350
45 CL-4 digital. . . . ca. 350
54 MZ-.. . . . . . . . . ca. 430
58 AF-1. . . . . . . . . ca. 430
50 MZ-5, 70 MZ-.. . ca. 250
76 MZ-.. . . . . . . . . ca. 200
Display: 5-element LED strip
Weight: 808 gr
Dimensions (h x w x d):
175 x 100 x 45 mm
Power Pack Set: ( Items supplied:)
Power Pack, belt clip, shoulder strap, AC/DC adap-
ter 960.
705 47 0033-A5 P76 14.05.2008 14:26 Uhr Seite 37