Metz MECABLITZ 64 AF-1 digital Nikon - Manual (Page 193)

10.2.3 Setting the slave group
• Press the sensor button on the touch
display for the channel group
(e.g.
). The window for selecting
the channel and group appears.
• Press the sensor button on the touch
display for the group .
• Press the sensor buttons on the
touch display to select the desired group
“A”, “B” or “C”.
• Press the sensor button on the touch
display for the selected group, e.g. .
The setting will take effect immediately. “B”
appears on the display.
A I CH2
GROUP
GROUP B
10.3 Testing remote flash mode
• Place the slave flash units in the desired
positions for the shot. Use flash unit
mounting foot S60 (optional accessories)
to set up the slave flash unit.
• Wait for all of the flash units involved to
become flash ready. Once the slave flash
units are flash ready, the AF auxiliary ligh
ተ will blink.
• Press the manual firing button ቨ on the
master flash unit to fire a test flash.
The slave flash units will respond in
succession, according to slave group,
with a test flash. If a slave unit fails to fire
a test flash, check the settings for remote
channel and slave group. Correct the
position of the slave flash unit so that it is
able to receive light from the master flash
unit via the sensor
ብ.
The flash mode is transmitted automatically
by master.
When the flash unit functions as master in
the cordless remote system, the activation
of the modelling light also activates the
modelling light of slave flash units.
193
M-
Zoom 35
REMOTE
SLAVE
Gr Ch
B 2
i
m
m
SLAVE
O
CHANNEL
GROUP
GROUP
O
q p
GROUP A
GROUP B
GROUP C
M-
Zoom 35
REMOTE
SLAVE
Gr Ch
A 2
i
m
m
k