Metz MECABLITZ 64 AF-1 digital Nikon - Manual (Page 190)

10.1.3 Setting the flash mode for the slave
flash unit on the master
• Press the sensor buttons on the
touch display as many times as it takes for
the flash group selection to appear.
• Press the sensor button on the touch
display for the desired flash group e.g. .
• Press the sensor buttons on the
touch display to set the desired flash
mode.
• Press the sensor button on the touch
display for the desired mode of operation
or alternatively .
The selected setting is adopted.
A I B I C
A -
M TTL
10.1.3.1 Set exposure correction (EV) or par-
tial light output for the slave flash
unit on the master
• Press the sensor buttons on the
touch display as many times as it takes for
the flash group selection to appear.
• Press the sensor button on the touch
display where a correction value is to
be set.
• Press the sensor buttons on
the touch display and set the desired
correction value.
• Press the sensor buttons on the touch
display for the desired correction value.
The selected setting is adopted.
A I B I C
190
A _
B _
C _
MODE
P / EV O
A u TTL I
B u — I
C u — I
REMOTE
MASTER
M
1/16
i A I B I C
A u — I
B u — I
C u — I
REMOTE
MASTER
M
1/16
i A I B I C
MODE
O
OFF
TTL
M
A
TTL
EV
B _
C _
MODE
P / EV O
EV
O
q p
2/3
1
1 1/3
A u TTL I 1
B u — I
C u — I
REMOTE
MASTER
M
1/16
i A I B I C
A u TTL I
B u — I
C u — I
REMOTE
MASTER
M
1/16
i A I B I C
k