Metz MECABLITZ 64 AF-1 digital Nikon - Manual (Page 188)

10.1 Remote master mode settings
The slave group A is activated at the factory.
The master flash unit and slave groups A, B
and C can be activated or deactivated!
If the master flash unit is deactivated, it only
controls the slave units and does not contri-
bute to exposing the shot!
10.1.1 Remote master mode settings
• Switch on the flash unit with the ባ
button.
The start screen appears.
• Press the sensor button of the displayed
mode of operation on the touch display as
many times as it takes for the display for
selecting the mode of operation to appear.
• Press the sensor buttons on the
touch display and select .
• Press the sensor button on
the touch display.
Remote master mode is set.
Remote master mode is shown in the picture.
Remote master mode is shown in the picture.
The master does not make any contribution
to exposure (REMOTE MASTER off ).
If the master is to contribute to exposure,
then set the mode
or on the master
(see 10.1.2).
REMOTE MASTER
M TTL
REMOTE MASTER
10.1.2 Setting the flash mode on the master
flash unit
• Press the sensor button on the touch
display as many times as it takes for the
mode selection to appear.
• Press the sensor button on the touch
display for the desired mode of operation
(in the example
.
The set mode of operation is adopted
immediately.
Off
TTL
188
0.6- 7.2 m
F
5,6
M-
Zoom 35 m
m
TTL
i
EV
MODE
O
q p
STROBO
REMOTE MASTER
REMOTE SLAVE
A u — I
B u — I
C u — I
REMOTE
MASTER
OFF
i A I B I C
A u — I
B u — I
C u — I
REMOTE
MASTER
TTL
i A I B I C
A u — I
B u — I
C u — I
REMOTE
MASTER
OFF
i A I B I C
MODE
O
OFF
TTL
M
k