Metz MECABLITZ 64 AF-1 digital Nikon - Manual (Page 189)

10.1.2.1 Setting the exposure correction
(EV) in TTL mode on the master
flash unit
• Press the sensor button on the
touch display for the master mode as many
times as it takes for the master selection to
appear.
• Press the sensor button on the touch
display.
• Press the sensor buttons on the
touch display and set the desired exposure
correction (e.g. +1).
• Press the sensor button for the desired
exposure correction value .
The setting is adopted immediately.
EV
1
TTL
10.1.2.2 Partial light output in M-mode
settings on the master flash unit
Set the mode to as described in 10.1.2.
• Press the sensor button on the touch
display as many times as it takes for the
master selection to appear.
• Press the sensor button on the touch
display.
• Press the sensor buttons on the
touch display to set the desired partial light
output.
• Press the sensor button of the selected par-
tial light output on the touch display.
The setting is adopted automatically.
M
M
1/16
P
189
A u — I
B u — I
C u — I
REMOTE
MASTER
TTL
1
i A I B I C
A u
I
B u — I
C u — I
REMOTE
MASTER
TTL
i A I B I C
MASTER
O
MODE
EV
EV
O
q p
2/3
1
1 1/3
A u — I
B u — I
C u — I
REMOTE
MASTER
M
1/16
i A I B I C
A u I
B u — I
C u — I
REMOTE
MASTER
M
1/1
i A I B I C
MASTER
O
MODE
P
P
O
q p
1/8 - 2/3
1/16
1/16 - 1/3
k