Metz MECABLITZ 64 AF-1 digital Nikon - Manual (Page 180)

The setting for automatic high-speed
synchronisation occurs on the camera
(see camera operating instructions)!
The display of the flash unit then in addition
shows "FP" (
).
7.5 Manual flash mode with distance
guideline (GN)
In this flash mode you enter the distance to
the subject in the flash unit. The mecablitz
64AF-1 coordinates the flash output and the
f-stops provided by the camera.
If sufficient exposure is not achieved for the
distance set, the sign
appears in front of
the distance information.
TTL FP
Setting the mode of operation
• Switch on the flash unit with the
ባ
button.
The start screen appears.
Thereafter, the flash unit always switches
on with the mode of operation that was
used last.
• Tap the shutter release to transfer data bet-
ween the flash unit and the camera.
• Press the sensor buttons on the
touch display and select .
• Press the sensor button on the touch
display.
If the reflector is tilted, operating mode
cannot be selected, as the distance to the
subject is unknown.
• Press the sensor button on the touch
display for the distance.
• Press the sensor buttons on the
touch display and select the distance to the
subject.
• Press the sensor buttons for the distance
selected.
The setting will take effect immediately.
GN
GN
GN
180
2.5 m
F
5,6
M-
Zoom 35 m
m
M
i
P
1/8
MODE
O
q p
M
GN
STROBO
F
5,6
M-
Zoom 35 m
m
GN
1.3m
i
EV
GN
O
q p
3.2m
3.6m
4.0m
k