Metz MECABLITZ 20 C-2 User Manual

Page 75

reflector is turned in such a manner that the

flash is bounced off a suitable reflective surfa-

ce (e.g. ceiling or wall of the room).
The reflector can be turned vertically up to

90°.
When turning the reflector vertically, it is

essential to ensure that it is moved by a suffi-

ciently wide angle so that direct light can no

longer fall on the subject. Consequently,

always turn the reflector at least to the 60°

lock-in position.
The light bounced off the reflecting surface

produces a soft and uniform illumination of the

subject. The reflecting surface must be white or

have a neutral colour, and it must not be struc-

tured, e.g. wooden beams in a ceiling might

cause shadows. For colour effects just select

the reflective surface in the desired colour.

Take into account that the maximum flash
range is considerably diminished when
bouncing the flash. The following rule of
thumb will help you determine the maxi-
mum flash range for a room of normal
height:

guide number

Maximum flash range = –––––––––––––––––––––––––

(flash-to-subject distance x 2)

8. Maintenance and care

Remove any grime and dust with a soft, dry or

silicon-treated cloth. Never use detergents that

could damage plastic parts.

☞

705 47 0068.A1 31.01.2006 13:45 Uhr Seite 75