Metz MECABLITZ 20 C-2 User Manual

Page 64

2. Mounting the flash

2.1 Mounting the flash on the camera

Turn off the camera and the flash by the
main switch!

• Push the locking slide (”LOCK”) to the right.
• Slide the flash foot completely into the

camera’s accessory shoe.

• Then push the locking slide ("LOCK") to the

left and fasten the flash unit.

2.2 Connection to the camera
The flash is triggered via the hot shoe contact

in the camera’s flash shoe.
If the camera’s flash shoe does not have a hot

shoe contact then a synchronising cable can

be used to establish the link between the

camera’s X socket and the sync socket of the

flash.

Please note: The flash must be switched
off before the synchronising cable is plug-
ged in or disconnected.

2.3 Removing the flash from the camera

Turn off the camera and the flash by the
main switch.

• Push the locking slide (”LOCK”) to the right.
• Withdraw the flash from the camera’s acces-

sory shoe.

☞

705 47 0068.A1 31.01.2006 13:45 Uhr Seite 64