17 specifications, English – Denon AVR-3300 User Manual
Page 62
62
ENGLISH
17 SPECIFICATIONS
2
Audio section
• Power amplifier
Rated output:
Front:
105 W + 105 W
(8
Ω
/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
140 W + 140 W (6
Ω
/ohms, 1 kHz with 0.7% T.H.D.)
Center:
105 W
(8
Ω
/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
140 W
(6
Ω
/ohms, 1 kHz with 0.7% T.H.D.)
Surround:
105 W + 105 W
(8
Ω
/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
140 W + 140 W (6
Ω
/ohms, 1 kHz with 0.7% T.H.D.)
(for multiple voltage and Taiwan R.O.C. models) Front:
170 w + 170 W
(6
Ω
/ohms, EIAJ)
Center:
170 W
(6
Ω
/ohms, EIAJ)
Surround:
170 W + 170 W
(6
Ω
/ohms, EIAJ)
Dynamic power:
140 W x 2 ch
(8
Ω
/ohms)
210 W x 2 ch
(4
Ω
/ohms)
240 W x 2 ch
(2
Ω
/ohms)
Output terminals:
Front/Center:
6 ~ 16
Ω
/ohms
Surround:
A or B
6 ~ 16
Ω
/ohms
A + B
8 ~ 16
Ω
/ohms
• Analog
Input sensitivity / input impedance:
200 mV / 47 k
Ω
/kohms
Frequency response:
10 Hz ~ 50 kHz: +0, –3 dB (DIRECT mode)
S/N:
102 dB (DIRECT mode)
Distortion:
0.01% (20 Hz ~ 20 kHz) (DIRECT mode)
Rated output/maximum output:
1.2 V / 8 V
• Digital
D/A output:
Rated output — 2 V (at 0 dB playback)
Total harmonic distortion — 0.008% (1 kHz, at 0 dB)
S/N ratio — 102 dB
Dynamic range — 96 dB
Digital input:
Format — Digital audio interface
• Phono equalizer (PHONO input — REC OUT)
Input sensitivity:
2.5 mV
RIAA deviation:
±1 dB (20 Hz to 20 kHz)
Signal-to-noise ratio:
74 dB (A weighting, with 5 mV input)
Rated output / Maximum output:
150 mV / 8 V
Distortion factor:
0.03% (1 kHz, 3 V)
2
Video section
• Standard video jacks
Input / output level and impedance:
1 Vp-p, 75
Ω
/ohms
Frequency response:
5 Hz ~ 10 MHz — +0, –3 dB
• S-video jacks
Input / output level and impedance:
Y (brightness) signal — 1 Vp-p, 75
Ω
/ohms
C (color) signal — 0.286 Vp-p, 75
Ω
/ohms
Frequency response:
5 Hz ~ 10 MHz — +0, –3 dB
• Color component video jacks
Input / output level and impedance:
Y (brightness) signal — 1 Vp-p, 75
Ω
/ohms
Cb (blue) signal — 0.7 Vp-p, 75
Ω
/ohms
Cr (red) signal — 0.7Vp-p, 75
Ω
/ohms
Frequency response:
5 Hz ~ 20 MHz — +0, –3 dB
2
Tuner section
[FM] (note: µV at 75
Ω
/ohms, 0 dBf=1 x 10
–15
W) [AM]
Reseiving Range:
87.50 MHz ~ 107.90 MHz
520 kHz ~ 1710 kHz
(for North America model)
(for North America model)
87.50 MHz ~ 108.00 MHz
522 kHz ~ 1611 kHz
(for Multiple voltage and Taiwan R.O.C. models)
(for Multiple voltage and Taiwan R.O.C. models)
Usable Sensitivity:
1.0 µV (11.2 dBf)
18 µV
50 dB Quieting Sensitivity:
MONO
1.6 µV (15.3 dBf)
STEREO
23 µV (38.5 dBf)
S/N (IHF-A):
MONO
80 dB
STEREO
75 dB
Total Harmonic Distortion (at 1 kHz):
MONO
0.15%
STEREO
0.3%
2
General
Powr supply:
AC 120 V, 60 Hz (for North America model)
AC 115/230 V, 50/60 Hz (for Multiple voltage and Taiwan R.O.C. models)
Power consumption:
5.6 A (for Norh America model)
320 W (for Multiple voltage and Taiwan R.O.C. models)
Maximum external dimensions:
434 (W) x 171 (H) x 416 (D) mm (17-3/32” x 6-11/32” x 16-3/8”)
Weight:
15.0 kg (33 lbs 2 oz)
2
Remote control unit (RC-860)
Batteries:
R6P/AA Type (two batteries)
External dimensions:
70 (W) x 215 (H) x 24 (D) mm (2-3/4” x 8-15/32” x 15/16”)
Weight:
200 g (Approx. 7 oz) (including batteries)
*
For purposes of improvement, specifications and design are subject to change without notice.