Denon AVR-3300 - Manual (Page 40)

40
ENGLISH
After starting playback
[1] Adjusting the sound quality (TONE)
The tone control function will not work in the direct mode.
1 The tone switches as follows each time the TONE CONTROL
button is pressed.
TONE
CONTROL
(Main unit)
2 With the name of the volume to be
adjusted selected, turn the SELECT
knob to adjust the level.
NOTE:
To prevent hearing loss, do not raise the volume level excessively
when using headphones.
[3] Turning the sound off temporarily (MUTING)
1 Use this to turn off the audio output
temporarily.
Press the MUTING button.
* Cancelling MUTING mode.
Press the MUTING button again.
MUTING
SPEAKER DOLBY / DTS SURROUND DIRECT
DSP SIMULATION 5CH STEREO STEREO
INPUT MODE ANALOG EXT.IN
MUTING
MASTER VOL.
AVR/AVC VIDEO DVD TV
AUDIO
VDP VCR
CD MD MULTI DECK
1
BASS 1 TREBLE
• To increase the bass or treble: Turn the control clockwise.
(The bass or treble sound can be increased to up to +12 dB
in steps of 2 dB.)
• To decrease the bass or treble: Turn the control clockwise.
(The bass or treble sound can be decreased to up to –12 dB
in steps of 2 dB.)
[2] Listening over headphones
1 Connect the headphones to the
PHONES jack of the front panel.
1
PHONES
2
OUTPUT
TUNING
BAND
TITLE MENU/GUIDE
MODE
MEMORY
USE/LEARN T.TONE MULTI OUTPUT DVD
SET UP
RETURN
STATUS
DISPLAY
ON SCREEN
SYSTEM SETUP SURROUND PARAMETER
CH SELECT
SELECT
ENTER
2
• The output to the speaker and pre-out jacks is turned off
and no sound is produced from the speakers.
* Caution: Switching off the power of the unit and the unit will
cancel the settings.
(Main unit)
(Remote control unit)
Press the OUTPUT button to
play the sound over the
headphones only.
1