Denon AVR-3300 - Manual (Page 45)

45
ENGLISH
Fader function
• This function makes it possible to lower the volume of the front channels (FL, C and FR) or the rear channels (SL and SR) together. Use it for
example to adjust the balance of the sound from the different positions when playing multi-channel music sources.
1 Select “FADER”.
CH.VOL
CH SELECT
ENTER
(Main unit) (Remote control unit)
2 Press the button to reduce the volume of the front
channels, the button to reduce the volume of the rear
channels.
The channel switches in the order shown below each time
this button is pressed.
* The EL and ER channels can only be adjusted when
“8CH EXT. IN” is selected.
* The fader function does not affect the SW, EL and ER
channels.
* The channel whose channel level is adjusted lowest can be faded
to –12 dB using the fader function.
* If the channel levels are adjusted separately after adjusting the
fader, the fader adjustment values are cleared, so adjust the fader
again.
Dolby Surround Pro Logic mode
1 Select the Dolby Surround Pro Logic mode.
• The Dolby Pro Logic indicator lights.
2
Play a program source with the mark.
• For operating instructions, refer to the manuals of the
respective components.
1 2
This is only displayed when setting the fader control.
SURROUND
MODE
(Main unit) (Remote control unit)
DOLBY / DTS
SURROUND
Light
NOTE:
• There are four Dolby Surround Pro Logic modes (NORMAL,
PHANTOM, WIDE and 3CH. LOGIC). The AVR-3300 sets the
mode automatically according to the types of speakers set
during the system setup process (page 19).
1 1
SPEAKER DOLBY / DTS SURROUND DIRECT
DSP SIMULATION 5CH STEREO STEREO
INPUT MODE ANALOG EXT.IN
MASTER VOL.
VOLUME DISC SKIP+
1
FL 1 C 1 FR 1 SR 1 SL 1
FADER
1
SW
1
ER
1
EL
1
* *
1
SPEAKER
TUNING
BAND
TITLE MENU/GUIDE
MODE
MEMORY
USE/LEARN T.TONE MULTI OUTPUT DVD
SET UP
RETURN
STATUS
DISPLAY
ON SCREEN
DOLBY / DTS SURROUND DIRECT
DSP SIMULATION 5CH STEREO STEREO
INPUT MODE ANALOG EXT.IN
MUTING
MASTER VOL.
VOLUME DISC SKIP+
AVR/AVC VIDEO DVD TV
AUDIO
VDP VCR
CD
MD
MULTI
DECK
SYSTEM SETUP SURROUND PARAMETER
CH SELECT
SELECT
ENTER
2
SELECT
SELECT
(Main unit) (Remote control unit)