Denon AVR-3300 - Manual (Page 42)

The remote control unit’s MULTI button
canbe operated at positions other than
“MULTI”.
The multi source switches in order each
time the multi button is pressed.
42
ENGLISH
[3] Remote control unit operations during multi-source playback (selecting the input source)
This operation is possible when “6CH IN & MULTI” is selected at the System Setup Menu’s “EXT. IN & MULTI” setting screen.
This operation is not possible in the REC OUT mode.
1 Set the slide switch to
“AUDIO” and “MULTI”.
DVD TV
VDP VCR
CD
MD
MULTI
DECK
(Remote control unit)
2 Press the input source
button.
The multi source switches
directly.
[4] Remote control unit operation during multi-source playback (adjusting the volume level)
The volume can only be adjusted when “6CH IN & MULTI” is selected at the System Setup Menu’s “EXT. IN & MULTI” setting screen and
“Variable” is set at the “MULTI VOL. LEVEL” screen.
1 Set the slide switch to
“AUDIO” and “MULTI”.
DVD TV
VDP VCR
CD
MD
MULTI
DECK
2 Use the VOLUME buttons to adjust the
volume level.
VOLUME
DVD
SPEAKER
TUNING
DOLBY / DTS
SURROUND DIRECT
DSP SIMULATION 5CH STEREO STEREO
INPUT MODE ANALOG EXT.IN
MUTING
MASTER VOL.
VOLUME DISC SKIP+
VDP TUNER SHIFT
TV/DBS PHONO
VCR-1 CD MD / TAPE CHANNEL
VCR-2/V.AUX TV/VCR
AVR/AVC VIDEO DVD TV
AUDIO
VDP VCR
CD
MD
MULTI
DECK
SYSTEM SETUP SURROUND PARAMETER
1 2 3
4
A / B
5 6
7 8 9
+10 0
2
1
MULTI
(Remote control unit)
(Remote control unit)
[2] Outputting a program source to an amplifier, etc., in a different room (MULTI mode)
This operation is possible when “6CH IN & MULTI” is selected at the System Setup Menus “EXT. IN & MULTI” setting screen. This operation
is not possible in the “8CH IN” mode.
1 Press the REC/MULTI button.
The display switches as follows each
time the button is pressed. REC/
MULTI
2 With “M-SOURCE SOURCE” displayed,
turn the FUNCTION knob and select the
source you wish to output.
• The “MULTI” indicator and the
indicator of the selected source light.
FUNCTION
3 Start playing the source to be output.
• For operating instructions, refer to the manuals of the
respective components.
4 To cancel, either press the REC/MULTI button or turn the
function knob and select “SOURCE”.
• When “SOURCE” is selected, the “MULTI” indicator turns
off.
REC/
MULTI FUNCTION
or
Display
NOTES:
• The signals of the source selected in the MULTI mode are also
output from the VCR-1 and VCR-2/V.AUX recording output
terminals.
• Digital signals are not output from the multi source audio output
jacks.
TUNING
BAND TITLE MENU/GUIDE
MODE
MEMORY
USE/LEARN T.TONE MULTI OUTPUT DVD SET UP
RETURN
STATUS
DISPLAY
ON SCREEN
SYSTEM SETUP SURROUND PARAMETER
CH SELECT
SELECT
ENTER
1,4
(Main unit)
(Main unit)
(Main unit) (Main unit)
(Remote control unit)
AVR/AVC VIDEO
AUDIO
AVR/AVC VIDEO
AUDIO
CD
8
(Remote control unit)
Example: CD