Denon AVR-1611 User Manual
Page 60
57
ENGLISH
Basic version
Simple version
Information
Advanced version
Registering preset codes
1
Press
ZONE SELECT
to switch the zone mode to
“MAIN”.
The “MAIN” indicator lights.
2
Press
AMP
to set the remote
control unit to amplifier operation
mode.
3
Press
MENU
.
The menu is displayed on the TV screen.
4
Use ui to select “Manual
Setup” – “Option Setup” –
“Remote Preset Codes” and then
press
ENTER
.
4-5.Option Setup
1.Volume Control
2.Source Delete
3.On-Screen Display
6.Zone Rename
5.Quick Select Name
7.Display
[ENT]:Select [RTN]:Back
4.Remote Preset Codes
5
Pressing ui, select the category
of device for preset registration.
Then press
ENTER
.
4-5-4.RC Preset Codes
Category Search
Blu-ray
CD
CABLE/PVR
CABLE
DVD
[ENT]:Select [RTN]:Back
CD Recorder
6
Pressing ui, select the first character of the brand
name. Then press
ENTER
.
Brand Search - DVD -
1
A
D
C
E
[ENT]:Select [RTN]:Back
B
• The first character is displayed as 1, A to Z. (Initials for the brand are
displayed for each category.)
For brand names that start with numbers, select “1”.
7
Pressing ui, select the brand name. Then press
ENTER
.
Brand[1/1] - DVD -
Daewoo
Dantax
DSE
Disney
Durabrand
[ENT]:Select [RTN]:Back
Denon
• When there are several pages of brand names, the pages can be
switched by pressing the remote control unit’s CH + or CH –.
NOTE
If the desired brand name is not listed, the supplied remote control
unit cannot control the device. Use the remote control unit supplied
with the device to be used.
8
The procedures for registering remote control codes
and remote control preset registration are displayed.
Category :DVD
Code[1/3]:
30490
Setup Remote
1.Press [Source]button.
3.Input Code with [0-9]
both[PowerON][DeviceON]
4.Press any key to check
device[e.g.DeviceON]
[QUICK1]:OK [QUICK2]:NG
2.Press and Hold 3sec.
Brand :DENON
9
Press the input source button on which the preset
code is to be registered (
DVD
,
BD
,
SAT/CBL
,
DOCK
,
V.AUX
,
GAME
or
TV
).
• For
TV
, only the preset code for the categories “TV”, “TV/DVD”, or
“TV/VCR” can be registered.
• For “TV”, “TV/DVD”, or “TV/VCR” categories, only the preset
code for
TV
can be registered.
10
Hold
POWER ON
and
ZONE/DEVICE ON
pressed
simultaneously for more than 3 seconds.
The zone mode indicator flashes twice.
11
Enter a five-digit code using
0
–
9
.
Press the buttons with an interval less than 10 seconds.
Category :DVD
Code[1/3]:
30490
Setup Remote
1.Press [Source]button.
3.Input Code with [0-9]
both[PowerON][DeviceON]
4.Press any key to check
device[e.g.DeviceON]
[QUICK1]:OK [QUICK2]:NG
2.Press and Hold 3sec.
Brand :DENON
• When the code is registered.
The zone mode indicator flashes twice.
• When the code is not registered correctly
The mode indicator slowly flashes once. Perform from step 9
again.
• When an input number is not correct
Press
POWER ON
once then perform the operations from Step
9 again.
12
Operate the device being used to check the operation.
• If the device is operating, press
QUICK SELECT 1
.
Go to step 13.
• If the device is not operating, press
QUICK SELECT 2
.
Go to step 14.