Denon AVR-1611 - Manual (Page 29)

26
ENGLISH
DENON original surround playback
1 Playing the source (vpage 20 –
23).
2
Press SIMULATION to select the
surround mode.
• Each time SIMULATION is pressed, the
surround mode is switched.
MULTI CH
STEREO
This mode is for enjoying stereo sound from all
speakers.
ROCK ARENA This mode is for enjoying the atmosphere of a live
concert in an arena.
JAZZ CLUB This mode is for enjoying the atmosphere of a live
concert in a jazz club.
MONO MOVIE z This mode is for playing monaural movie sources
with surround sound.
VIDEO GAME This mode is suited for achieving surround sound
with video games.
MATRIX This mode lets you add a spacious feel to stereo
music sources.
VIRTUAL This mode is for enjoying surround effects using
only the front speakers or headphones.
z When playing sources recorded in monaural in the “MONO
MOVIE” mode, the sound will be off balance with a single
channel (left or right), so input to both channels.
Depending on the program source being played, it may not be possible
to achieve a satisfactory surround effect. In this case, try other modes
to achieve a sound field suited to your tastes.
NOTE
When the input signal is Dolby TrueHD, Dolby Digital Plus, DTS-HD
or DTS Express, you cannot select DENON original surround mode.
Stereo playback
This is the mode for playing in stereo. The tone can be adjusted.
• Sound is output from the front left and right speakers and subwoofer.
• If multichannel signals are input, they are mixed down to 2-channel
audio and are played.
1 Playing the source (vpage 20 –
23).
2
Press D/ST to select “STEREO”.
Stereo playback begins.
Direct playback
Sound recorded in source is played as is.
• Surround back signals or front height signals are not created.
• In this mode, the following items cannot be adjusted.
• Tone (vpage 45) • MultEQ® (vpage 46)
• Dynamic EQ® (vpage 46) • Dynamic Volume® (vpage 47)
• RESTORER (vpage 48)
1
Playing the source (vpage 20 –
23).
2
Press D/ST to select “DIRECT”.
Direct playback begins.