Denso BHT-400B-CE - Manual (Page 97)

Chapter 2 Getting Started the BHT and System Menu
[ 3 ] System Properties
Choosing "3:System Properties" in System Menu calls up the window
shown at left.
[1] Barcode: Opens the Barcode menu.
[2] Beeper/Vibration: Opens the Beeper/Vibration menu.
[3] Control Panel: Opens the Control Panel window.
[4] File System: Opens the File System menu.
[5] Power Management: Opens the Power Management menu.
[6] Key: Opens the Key menu.
[7] Status Display: Opens the Status Display menu.
[8] Radio Frequency: Opens the NIC Control menu.
[3.1] Barcode
On the System Properties window, double-tap the "Barcode", and the
Barcode property appears.
INVERT: Activates or deactivates the black-and-white
inverted label reading function.
DECODE LEVEL: Sets the decode level.
MARKER: Sets the marker ON/OFF mode.
ITF: Sets the default minimum number of digits to
be read for ITF.
STF: Sets the default minimum number of digits to
be read for STF.
CODABAR: Sets the default minimum number of digits to
be read for CODABAR.
Black-and-white inverted label reading function (INVERT)
This function makes it possible to read white bars on a black background.
Activating this function might increase the frequency of bar-code reading errors. Usually this
function should be set to OFF.
77