Denso BHT-400B-CE - Manual (Page 25)

Chapter 1 Quick Guide
„ Setting the stylus
Hand strap
stylus
„ Using the stylus
The BHT has a touch screen LCD. With the stylus that comes with the BHT, you can operate keys,
menus, and icons displayed on the touch screen.
Before using the touch screen, be sure to set it up. (Refer to Chapter 2, Section 2.3.2, "Setting-up 2:
Calibrating the touch screen.")
• Always use the stylus to operate the touch screen. Do not use your fingernails or any pointed or
hard object or apply a strong pressure or impact to the LCD.
• Before operation, clean the surface of the LCD and the tip of the stylus if dirty. Using dirty ones will
scratch the LCD surface or prevent the stylus from sliding smoothly.
„ Operating the touch screen
Action Description
Tap Refers to touching the LCD once.
(Functionally equivalent to "click" with a mouse on a PC.)
Double-tap Refers to quickly touching the LCD twice.
(Functionally equivalent to "double-click" with a mouse on a PC.)
Drag Refers to moving the stylus to the object while touching the LCD.
(Functionally equivalent to "drag" with a mouse on a PC.)
5