Denon AVR-2802 - Manual (Page 30)

30
ENGLISH
12 LISTENING TO THE RADIO
Auto tuning
VOLUME LEVEL
AUTO
LOCK
STAND BY DIGITAL PCM
SIGNAL DIGITAL
INPUT
REMOTE
SENSOR
B
1 1 Set the input function to “TUNER”.
FUNCTION
(Main unit)
2 Watching the display, press
the BAND button to select
the desired band (AM or
FM). BAND
(Remote control unit)
3 Press the MODE button to
set the auto tuning mode.
MODE
TUNER
3
(Remote control unit)
(Remote control unit)
4
TUNING
(Remote control unit)
“Auto” appears on the
display.
Press the TUNING UP or
DOWN button.
Automatic searching begins,
then stops when a station is
tuned in.
If tuning does not stop at the desired station, use to
the “Manual tuning” operation.
DVD
START LEARNED/TX
SPEAKER
TUNING
BAND TITLE MENU/GUIDE
MODE
MEMORY
RDS
PTY
RT
USE/LEARN T.TONE MULTI DVD SET UP
RETURN
STATUS
DISPLAY
ON SCREEN
DOLBY / DTS
SURROUND DIRECT
DSP SIMULATION 5CH / 6CH STEREO STEREO
INPUT MODE ANALOG EXT.IN
MUTING
MASTER VOL.
VOLUME DISC SKIP+
SYSTEM CALL POWER
VDP TUNER SHIFT
TV/DBS PHONO
VCR-1 CD CDR / TAPE CHANNEL
VCR-2/V.AUX TV/VCR
AVR/AVC VIDEO DVD TV
AUDIO
VDP VCR
CD MULTI CDR/MD TAPE
SYSTEM SETUP SURROUND
PARAMETER
CH SELECT
SELECT
RC-904
1 2 3
4
SET
A / B
CALL OFF
ENTER
ON / SOURCE
5 6
7 8 9
+10 0
4
2
3
1
Manual tuning
1 Set the input function to “TUNER”.
FUNCTION
(Main unit)
2 Watching the display, press
the BAND button to select
the desired band (AM or
FM).
BAND
(Remote control unit)
TUNER
3
(Remote control unit)
3 Press the MODE button to
set the manual tuning mode.
Check that the display’s
“AUTO” indicator turns off.
MODE
(Remote control unit)
4 Press the TUNING UP or
DOWN button to tune in the
desired station.
The frequency changes
continuously
when the
button is held in.
TUNING
(Remote control unit)
NOTES:
• When in the auto tuning mode on the FM band, the “STEREO” indicator lights on the display when a stereo
broadcast is tuned in. At open frequencies, the noise is muted and the “TUNED” and “STEREO” indicators
turn off.
• When the manual tuning mode is set, FM stereo broadcasts are received in monaural and the “STEREO”
indicator turns off.
Preset memory
DVD
START LEARNED/TX
SPEAKER
TUNING
BAND TITLE MENU/GUIDE
MODE
MEMORY
RDS
PTY
RT
USE/LEARN T.TONE MULTI DVD SET UP
RETURN
STATUS
DISPLAY
ON SCREEN
DOLBY / DTS
SURROUND DIRECT
DSP SIMULATION 5CH / 6CH STEREO STEREO
INPUT MODE ANALOG EXT.IN
MUTING
MASTER VOL.
VOLUME DISC SKIP+
SYSTEM CALL POWER
VDP TUNER SHIFT
TV/DBS PHONO
VCR-1 CD CDR / TAPE CHANNEL
VCR-2/V.AUX TV/VCR
AVR/AVC VIDEO DVD TV
AUDIO
VDP VCR
CD MULTI CDR/MD TAPE
SYSTEM SETUP SURROUND
PARAMETER
CH SELECT
SELECT
RC-904
1 2 3
4
SET
A / B
CALL OFF
ENTER
ON / SOURCE
5 6
7 8 9
+10 0
3
4
2,5
1 Use the “Auto tuning” or “Manual tuning”
operation to tune in the station to be preset in
the memory.
2 Press the MEMORY button.
MEMORY
(Remote control unit)
3 Press the SHIFT button and
select the desired memory
block (A to E). SHIFT
(Remote control unit)
5 Press the MEMORY button
again to store the station in
the preset memory.
MEMORY
(Remote control unit)
To preset other channels, repeat steps 2 to 5.
A total of 40 broadcast stations can be preset
— 8 stations (channels 1 to 8) in each of blocks
A to E.
Checking the preset stations
1 Press the ON SCREEN button repeatedly until the “Tuner Preset Stations”
screen appears on the on screen display.
RETURN
ON SCREEN
(Remote control unit)
• The preset broadcast stations can be checked on the on screen display.
TUNING
BAND TITLE MENU/GUIDE
MODE
MEMORY
RDS
PTY
RT
USE/LEARN T.TONE MULTI DVD SET UP
RETURN
STATUS
DISPLAY
ON SCREEN
SYSTEM SETUP SURROUND
PARAMETER
CH SELECT
SELECT
ENTER
1
4 Press the CHANNEL + (UP)
or – (DOWN) button to select
the desired preset channel (1
to 8).
CHANNEL
(Remote control unit)