Denon AVR-2802 - Manual (Page 14)

14
ENGLISH
• Use this to turn the on-screen display (messages other than the menu screens) on or off.
Setting the on-screen display (OSD)
1 At the System Setup Menu select “On Screen Display”.
2 Switch to the On Screen Display screen.
ENTER
3 Select “ON” or “OFF”.
4 Enter the setting.
The System Setup Menu reappears.
ENTER
Use this to automatically search for FM broadcasts and store up to 40 stations at preset channels A1 to 8, B1 to
8, C1 to 8, D1 to 8 and E1 to 8.
NOTE:
• If an FM station cannot be preset automatically due to poor reception, use the “Manual tuning” operation to
tune in the station, then preset it using the manual “Preset memory” operation.
Auto tuner preset
1 Use the CURSOR buttons to specify “Auto Tuner Presets”
from the “System Setup Menu” screen.
2 Press the ENTER button.
The “Auto Preset Memory” screen appears.
ENTER
3 Use the CURSOR button to select “Yes”.
“Search” flashes on the screen and searching begins.
“Completed” appears once searching is completed.
The display automatically switches to screen.
This completes system setup. Once these settings are made, there is no need to change them unless
different AV components are connected or the speakers are repositioned.
This button can be pressed at any time during the system setup process to complete the process.
After completing system setup
1 At the System Setup Menu, press the SYSTEM SETUP button.
The changed settings are entered and the on-screen display turns off. TITLE
SYSTEM SETUP
• On-screen display signals
1
2
3
4
Signals input to the AVR-2802 On-screen display signal output
VIDEO signal input
jack (yellow)
S-video signal
input jack
VIDEO MONITOR OUT video
signal output jack (yellow)
S-video MONITOR OUT video
signal output jack
E
C
C
E
E
E
C
C
C
C
E
E
C
E
C
C
(C: Signal E: No signal ) (C: On-screen signals output E: On-screen signals not output )
NOTES:
• The on-screen display signals are not output from the color difference (component) video signal
MONITOR OUT jacks.
• For 4 above, the on-screen display signals are output to the VIDEO MONITOR OUT video signal output
jack (yellow) if the monitor TV is not connected to the S-video MONITOR OUT video signal output jack.