Denon AVR-2802 - Manual (Page 25)

25
ENGLISH
2
Play a program source with the mark.
• For operating instructions, refer to the manuals of the respective components.
NOTE:
• There are four Dolby Surround Pro Logic modes
(NORMAL, PHANTOM, WIDE and 3 STEREO).
The AVR-2802 sets the mode automatically
according to the types of speakers set during the
system setup process (page 10).
3 Set the surround parameter mode.
SURROUND
PARAMETER
(Main unit)
MENU/GUIDE
SURROUND PARAMETER
(Remote control unit)
MODE CINEMA
Display
The on-screen display differs according to whether the operation is performed from the main unit or
the remote control unit.
4 Select the play mode.
SELECT
(Main unit) (Remote control unit)
Display
MODE CINEMA MODE MUSIC MODE PRO LOGIC
5 Select the various parameters. (See “Surround parameters q” for a description of the various parameters.)
SURROUND
PARAMETER
(Main unit) (Remote control unit)
MODE PRO LOGIC
CINEMA EQ
MODE CINEMA
CINEMA EQ
MODE MUSIC
PANORAMA
DIMENSION
CENTER WIDTH
When set with the on-screen display using
the remote control unit while in the MUSIC
mode, set the “ ” mark to “OPTION 0”
using the and cursor buttons, then
press the cursor button.
Press the ENTER button to return to the
previous screen.
6 Set the various surround parameters.
SELECT
(Main unit) (Remote control unit)
7 When the surround parameters are set using
the buttons on the main unit, stop operating
buttons after completing the settings. The
settings are automatically finalized and the
normal display reappears after several seconds.
When the settings are made using the buttons
on the remote control unit, press the SURR.
PARA. button to finish.
Surround parameters q
Pro Logic
II Mode:
The Cinema mode is for use with stereo television shows and all programs encoded in Dolby Surround.
The Music mode is recommended as the standard mode for autosound music systems (no video), and is
optional for A/V systems.
The Pro Logic mode offers the same robust surround processing as original Pro Logic in case the source
contents is not of optimum quality.
Select one of the modes (“Cinema”, “Music” or “Pro Logic”).
Panorama Control:
This mode extends the front stereo image to include the surround speakers for an exciting “wraparound”
effect with side wall imaging.
Select “OFF” or “ON”.
Dimension Control:
This control gradually adjust the soundfield either towards the front or towards the rear.
The control can be set in 7 steps from 0 to 6.
Center Width Control:
This control adjust the center image so it may be heard only from the center speaker; only from the left/right
speakers as a phantom image; or from all three front speakers to varying degrees.
The control can be set in 8 steps from 0 to 7.
1 3
VOLUME LEVEL
B
1 3
2 4,5 2,6
DVD
START LEARNED/TX
SPEAKER
TUNING
BAND TITLE MENU/GUIDE
MODE
MEMORY
RDS
PTY
RT
USE/LEARN T.TONE MULTI DVD SET UP
RETURN
STATUS
DISPLAY
ON SCREEN
DOLBY / DTS
SURROUND DIRECT
DSP SIMULATION 5CH / 6CH STEREO STEREO
INPUT MODE ANALOG EXT.IN
MUTING
MASTER VOL.
VOLUME DISC SKIP+
SYSTEM CALL POWER
VDP TUNER SHIFT
TV/DBS PHONO
VCR-1 CD CHANNEL
VCR-2/V.AUX TV/VCR
AVR/AVC VIDEO DVD TV
AUDIO
VDP VCR
CD MULTI CDR/MD TAPE
SYSTEM SETUP SURROUND
PARAMETER
CH SELECT
SELECT
RC-904
1 2 3
4
SET
A / B
CALL OFF
ENTER
ON / SOURCE
5 6
7 8 9
+10 0
1
2
1
5
4
6
CDR / TAPE
Dolby Digital mode (only with digital input) and DTS Surround mode
(only with digital input)
Playback with digital input
1 Select the input source.
q Select an input source set to digital
(COAXIAL/OPTICAL) (see page 13).
FUNCTION VDP
2
(Main unit) (Remote control unit)
w Set the input mode to “AUTO” or “DTS”.
INPUT MODE INPUT MODE
(Main unit) (Remote control unit)
2 Select the Dolby/DTS
Surround mode.
SURROUND
DOLBY / DTS
(Remote control unit)
When performing this operation from the main
unit’s panel, press the SURROUND MODE
button, then turn the SELECT knob and select
Dolby Pro logic or DTS NEO:6.
SURROUND MODE SELECT
(Main unit) (Remote control unit)