Meinberg PZF511 - Manual (Page 14)

14
Menu IRIG
This menu allows to select an IRIG, AFNOR or IEEE1344 timecode to be generated.
Besides the amplitude modulated sine wave signal, the PZF511 also provides an
unmodulated DC-Level Shift TTL output in parallel. Thus six time codes are available.
a) B002: 100pps, PWM DC signal, no carrier
BCD time-of-year
b) B122: 100pps, AM sine wave signal, 1 kHz carrier frequency
BCD time-of-year
c) B003: 100pps, PWM DC signal, no carrier
BCD time-of-year, SBS time-of-day
d) B123: 100pps, AM sine wave signal, 1 kHz carrier frequency
BCD time-of-year, SBS time-of-day
e) AFNOR: Code according to NFS-87500, 100pps,
AM-Sine wave signal, 1kHz carrier frequency,
BCD time-of-year, complete date, SBS time-of-day,
Signal level according to NFS-87500
f) IEEE1344: Code according to IEEE1344-1995, 100pps,
AM sine wave signal, 1kHz carrier frequency,
BCD time-of-year, SBS time-of-day, IEEE1344
extensions for date, timezone, daylight-saving
and leap second in control functions (CF) segment.
also see table 'Assignment of CF segment in IEEE1344 mode'
Menu IRIG REF
This menu lets the user select a timezone for the timecode generation.